Decreasing the boiler pressure is a very crucial thing to do just to maintain your appliances safe and sound, going it back to the normal effectiveness and performance. Always remember that both the low and the high pressure readings will denote no good for the performances of the heating system. Decrease the pressure really much, and you can have to pressurize again your boiler.
When you need to call a Boiler Engineer?
When the boiler pressure keeps on rising or is the boiler pressure still at a high level even after bleeding the radiators? Well, you may be dealing with some serious issue, so you better locate the boiler engineer for some inspection. Moreover, when some of the fixes have been applied, but still the boiler pressure is kept on rising, then, that is already a clear sign where you are in need of a new boiler.
To have your convenience and peace of mind, check the boiler control panel for the error codes. There are code variations that you can see from the boiler brand.
Do take note that the boiler engineer will be even happier when you tell them about the error code you are seeing over a control panel. This can help them give you with the appropriate quote for a particular job, and can also give the specialists some idea about what really the problem is. Therefore, they can prepare for a job in advance which will save both of your time.
How to avoid the rising of boiler pressure?
The moment that the trouble is fixed, whether you have found out the cause of the increased in pressure or not, some things are there where you may do to avoid it from taking place.
- Be careful to not overfill the system.
- Bleed your radiators regularly. This can allow the air out, then, will decrease the pressure in the system.
- Schedule the regular boiler services and maintenance with your reliable company.
- Close your filling loop – the two valves that allow the water in the system. Keep them open for a long period will allow more water in the system and will cause the pressure to come up again.
- Take the expansion vessel checked, because this is the side of the system which keeps the pressure steady and will prevent sudden changes.
- If it is dealing with fixing the problematic core heating system, changing the parts or pressuring again the boiler, but, please phone the Gas Safe Engineers. These are not like any DIY jobs, and you will do more harm instead of doing better when you try on some DIY fixes.
Takeaways
- The high boiler pressure is not really dangerous and the boiler will not blow up.
- The low boiler pressure isn’t really good for the heating system.
- There are lots of reasons that will cause the pressure’s increase.
- You have to discuss the error code with the engineer in advance.
- Aside from the bleeding radiators, all of the other fixes should be performed by the specialist.
Comments
Post a Comment